Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 30

Advertising

＊

Red Mark

(Recording)

Recorded Memory

Fixed horizontal axis

RPM

Fixed 9-15 scale

A/F Air Fuel Ratio Graph

Selection of recording source.
It can be freely combined with any of the 4 sources such as AUX～DATA 1-3.
(All the sources can also be the same).

Selection of recording memory.
It is possible to record each source on different memories. Ex: AUX on M1,
DATA 1 at the external voltage on M2, etc.

If comparing data from the same sensor,
M1: Boost at 1.0
M2: Boost at 1.2
M3: Boost at 1.5
With this set up, each boost setting characteristic can be diagnosed and
compared to each other.

②

. A/F Graph (Air Fuel Ratio Graph)

It records and displays three memories of A/F graph based on RPM
Advice:
Make sure to setup the external voltage input of 16.0 V to read as 16.0.
An optional amp unit can also be attached to the AUX port.

Turn the encoder and the cursor will move right and left to display the A/F ratio at the intersecting point of
the graph line and RPM. Press the encoder to highlight the recording channel; then, turn the encoder to
select a channel number. Press the encoder to confirm the changes and it will shift back to the graph
display screen (Press RIGHT to cancel the changes and to return to the previous screen)
All the other functions are the same as the Chassis Dynamo Graph.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals