Bazooka CSA50.4 - Manual (Page 14)

R
EMOTE BASS CONTROL MODULE (CSA300.1 OPTIONAL)
Before connecting the remote, it will be necessary to find a mounting location that
will be easy to access for adjustment. Once you select your mounting location, you
will need to run the control wire from the remote to the amplifier.
To avoid
possibility of induced noise from the car's electrical system (i.e. popping noises or
engine noise), run the cable from the remote to the amplifier away from the car's
electrical wiring.
Please note: Once the remote is plugged in, it overrides the bass boost on the
amplifier and becomes the primary bass adjustment.
13
POWER BASS
BOOST
12dB 0dB
X-OVER
130Hz 40Hz
LEVEL INPUT OUTPUT REMOTE
L
R
MAX MIN
MAX MIN