Bos VOID 2014 User manual - Manual (Page 7)

3.6. AIR VALVE ROTATION
The schrader valve can rotate around the air chamber, but also be placed forwards or backwards, in order to fit into
any kind of frame.
In order to adjust the position of the air valve to the front or to the rear or just rotating it, please follow the procedure:
Procedure
CAUTION
Never place the valve in front of the reservoir. This could damage seriously your shock on the first compression
1
1. Install the shock in a vise using a soft jaws (1)
2. Tighten slightly to avoid damaging yout shock
3. Take note of the current pressure in your
shock before deflate it. Take into account the air
loss, due to the insertion of the pump.
4. Unscrew and remove the air chamber cylinder
(2) et (3). Never use tool.
5. if you need to change the position of the
valve, remove the valve ring and place it in the
right way (4).
CAUTION
Make sure that the jaws are applied on a flat
surface and do not touch the rebound knob.
2
3 4