CalDigit eSATA Extender - Manual (Page 2)

2
eSATA Extender
A. Installing the CalDigit eSATA Extender
For Mac:
• Please remove the CalDigit VR and its accessories from the
box. Connect the power cord and FireWire cable or eSATA
cable.
• (For Mac Pro) If you are using the eSATA interface, and do
not have an eSATA adapter card installed in your Mac Pro.
Please connect the CalDigit eSATA extender (as shown
below and in the following steps) to the SATA port on the
logic board of your Mac Pro.