CalDigit HDPro - Manual (Page 18)

18 D. Installing RAID Shield
Mac
D.
Installing RAID Shield
1. Press the power switch to turn on the HDPro. It
is important to remember that the HDPro should be
turned on for 15 seconds before you start up your
computer.
2. Insert the provided CD into the computer DVD/CD
drive.
3. CD/MAC installation/1.x/HDPro_IP_MAC_1.x.0.mpkg
(For latest driver, please go to http://www.caldigit.com/
support.asp )
4. When installation is complete, restart the computer.