CalDigit HDElement - Manual (Page 8)

8
Configuring your CalDigit HDElement
You will need to first determine your ID switch position 1.
before you start the configuration. If this is the first CalDigit
HDElement you are connecting, please set the switch as
shown on the right. Please also refer to the illustration if you
are connecting your second or third CalDigit HDElement.
Note: Your CalDigit HDElement's LED display will
not display properly if your switch is set to a wrong
position.
First
HDElement
Second
HDElement
Third
HDElement
1 2 3
1 2 3
1 2 3