Cambridge SoundWorks Ambiance 602 6.5 2-Way In-Ceiling Stereo Loudspeaker - Manual (Page 4)

Thank you For purchasing
an Ambiance in-ceiling stereo
loudspeaker. It will provide natural,
balanced sound reproduction
without taking up space in your
listening room. The superb acoustic
performance and single enclosure
stereo design makes it an excellent
choice for any location that cannot
accommodate two separate
speakers for stereo sound.
Ambiance stereo loudspeaker is
easily installed by anyone from a
professional installer to a do-it-
yourselfer, and the in-ceiling design
provides nearly invisible background
music.
The white finish may be easily
painted to match the surrounding
surface (refer to page 4).
The Ambiance in-ceiling stereo
loudspeaker utilizes a dual-voice
coil woofer and two tweeters to
reproduce stereo sound from a
single enclosure.
The dual silk-dome tweeters
are designed for smooth high
frequency reproduction. A self
resetting automatic protection
circuit protects the tweeters from
damage due to overpowering or
excessive distortion. The dual-voice
coil woofer driver uses a polymer
cone with butyl rubber surround.
The assembly is both durable and
sonically peerless.
Care in speaker placement and
installation will pay dividends in
optimum enjoyment, This booklet
provides tips and instructions to
help you get the most from your
loudspeaker. Please read it through
thoroughly before proceeding with
the speaker installation.
Installing the Ambiance speaker
is straightforward and may be
performed by an experienced do-
it-yourself homeowner. However,
some familiarity with typical home
construction is necessary.
This manual assumes the installer
possesses skill in the proper use of
hand and power tools, a knowledge
of local fire and building codes, and
a familiarity with the area above
the surface of a ceiling where the
speaker will be installed.
Note: Cambridge SoundWorks will
not assume any responsibility for
the integrity of the attachment of the
speaker and its mounting brackets to
a wall or ceiling. The quality of the
installation is solely the responsibility
of the installer.
Cambridge SoundWorks is
not responsible for any damage
resulting from the installation or
installation process, or due to wiring
or materials used in the installation.
If you are not comfortable with
performing a speaker system
installation, we recommend you rely
on a qualified home entertainment
installer. Contact your dealer
or Cambridge SoundWorks for
assistance in selecting a suitable
installer.
1. Stud-finder.
2. Pencil.
3. Drill with 1/4” bit (for plaster
ceilings).
4. Utility knife, jigsaw, drywall router,
or other means of cutting a hole
in the mounting surface.
5. Wire cutter and/or stripper for
preparing speaker wires.
6. #1 Phillips screwdriver.
Introduction
Tools Required
About This Manual
1 2