BT eFrame 1000 - Manual (Page 7)

7 Setting up
If you have selected a password protected network that
requires you to enter an encryption key, you will be
prompted to enter that key now (Fig. 6).
If you are using a BT Home Hub, the WEP encryption
key is shown on a label on the back. Other wireless
routers may also have a similar label, or the WEP key
will be the password you used when first setting up
your wireless network.
• Press / / / to select a character and press .
• When you have entered the full code, scroll to OK key
and press . The display shows CONNECTING and
some additional information about your IP address.
• You have successfully connected.
Press to display the main menu (Fig. 7).
Fig. 6
Fig. 7
8557 BT eFrame QSG [4].indd 7 1/5/08 12:32:12