Carbolite CAF DIGITAL IMAGING - Manual (Page 3)

CAF Digital Imaging
MF36-3.21
page 3
Fig 1.
Element wiring and positions.
Fig 2. Work tube and back plug assembly.
Fig 3. Front tube seal assembly.
Fig 4. Door arm assembly.
Fig 5a. Camera mounting bracket.
Fig 5b. Standard lens & camera assembly.
Fig 5c. Sliding the camera mounting bracket assembly onto the door arm.
Fig 5d. Securing the camera mounting bracket assembly to the door arm.
Fig 5e. Mounting the standard lens & camera assembly.
Fig 5f. Standard lens & camera assembly in position.
Fig 5g. Zoom lens assembly & lens clamp.
Fig 5h. Fitting the camera to the zoom lens.
Fig 5j. Mounting the lens heat shield.
Fig 5k. Mounting the zoom lens & bracket assembly.
Fig 5l. Zoom lens in position.
Fig 5m. Adjusting the position of the zoom lens & camera assembly.
Fig 5n. Releasing lens clamp screw to rotate camera & lens assembly.
Fig 5p. Storing the zoom lens & carrier.
Fig 6.
Rear view of furnace showing brick box assembly.
Fig 7. Front tube seal position.
Fig 8. Tube end seal assembly tightening sequence.
Fig 9. Work tube front support.
Fig 10. Fitting the door arm assembly.
Fig 10a. Adjusting the door arm assembly.
Fig 11. Furnace case and controls.
Fig 12. Positioning the furnace.
Fig 13a. Positioning samples on the sample carrier.
Fig 13b. Loading samples into the work tube.
Fig 13c. Loading samples into the work tube.
Fig 14. Set-up options.
Fig 15a. File name and sample identifier.
Fig 16. File directory.
Fig 17. Door arm assembly exploded view.
Fig 18. Report sheet.
Fig 19. Formed wire sample.
Fig 20. Sample carrier, sample tiles and sample positions.
Fig 21. Route of camera video cables.