Brother HL-2400C - Manual (Page 127)

USER’S GUIDE
4–64
FEEDER Button
You can select the feeder and manual feed mode with the Feeder button.
Display Message Feeder
FEEDER=AUTO Select a feeder or auto paper feed.
MANUAL MODE=ON Enable/disable the manual feed
mode.
MEDIA TYPE Select print media
SMALL SIZE Set the small paper size detection
of sizes under B5(JIS)
You can check the current feeder.
When you want to change settings with the
Feeder button, hold down
the Shift button and press the Feeder button. You will then enter the
setting mode where you change the feeder, manual feed mode, etc.
FEEDER
To select the feeder, follow these steps:
1. Press the Sel button to set the printer off-line.
2. Hold down the Shift button and press the Feeder button.
When you enter the setting mode, the display first shows the current
feeder setting with the asterisk.
3. Press the ▲ or ▼ button until the desired feeder appears on the
display.
Display Message Paper Feed Method/Paper Source
FEEDER=AUTO Auto paper feed
FEEDER=TRAY1 Upper Media Cassette (Tray 1)
FEEDER=TRAY2 Optional Lower Media Cassette
(Tray 2)