Carter-Hoffmann HL10-10-RW - Manual (Page 3)

3
FEATURES & SPECIFICATIONS
Top-mounted enclosed water reservoir
cannot be contaminated by food debris.
Off-the-shelf standard size pan is easy
to clean and inexpensive to replace.
FEATURES & SPECIFICATIONS
APPROVALS :
NSF/ANSI 4
hot LOGIX™
Features & Benefits
 Get a holding cabinet and a two-drawer warmer - all in one cabinet and
save space!
 All stainless steel construction with double pane glass door
 Top holding cabinet has precision-engineered top mount humidified heat-
ing system with digital controls and temperature and humidity read-out;
blower heat for active, even, fast heat-up and recovery. Precise humidified
holding settings.
 Top-mounted removable humidity water reservoir; easy to fill, clean and
monitor water level.
 Adjustable universal pan slides for 18”x26” and 12”x20” pans; Optional
fixed angle slides for 18”x26” pans
 Two drawer warmer built into bottom of unit; accommodates 12”x20” steam
table pans up to 6” deep, end-loaded (Wells Mfg Model # RWN-26)
 Individual thermostatic temperature control for each drawer with adjustable
front vents to allow humidity control
 Self-latching, one-touch drawer closure
 Heavy-duty casters, two swivel and two swivel with brake
 12” x 20” x 2.5” S.S. pan mounted under cabinet for condensation
Model
Number
Cabinet Pan/Tray
Capacity*
12”x20” 18”x26”
Slide
Pairs
Provided
Drawer Warmer
Pan Capacity
12”x 20”
(up to 6” deep)
Overall Dimensions
Height Depth Width
in (mm)
Caster
Diameter
in (mm)
Class 100
Shipping
Weight
lbs (kgs)
HL10-10-RW 20 10 10 2
(one per draw-
er)
76-3/8 32-5/8 28-1/4
(1940) (829) (718) 5
(127)
458
(208)
*Standard spacing at 3”, adjustable on 1-1/2” centers.
Dual Warming Cabinet with Pan Slides and Two-Drawer Warmer
Electrical Information:
120 volt, 2900 watts, 24.2A, 1PH, 60Hz, NEMA 5-30P
plug. Ten foot rubber cord with 3 prong grounding plug.
HL10-10-RW
shown with optional double-pane
tempered glass door