CCTV Camera Pros iDVR-RT Series Video Surveillance Recorders Software Manual - Manual (Page 37)

Enterprise Management Suite 35
1) Event
- The EMS will send notifications related to the system abnormalities such as [Connect,
Disconnect, HDD fail, Fan Fail, Temperature Fail]
2) Device
- Select from registered DVR or system. System means PC which EMS is installed.
3) Sub Type
- Select the Device which is connected with above no 2.For example, DVR with [Camera, Alarm]
or system with [Window or Sound]
4) Sub No
- Select the camera / alarm number to control
5) Command
① DVR>Camera
- Select the camera PTZ options, snapshot, Live video window. Thumbnail log will be provided
when you select snapshot.
② DVR> Digital output
- Select Digital output high/ low
③ System> Sound
- Select Play sound. EMS will emit a sound when a DVR Connect, disconnect, HDD Fail, Fan
Fail, Over Temperature (Depends on which you select the event on above No 1)
Some wav file samples are provided and located in [C:\Program Files\EMS\Sound], you can
use your own sound file.
④ System>Window
- Select <Alert Window>. Message windows come up for 10 seconds and down.