CCTV Camera Pros iDVR-E Series Video Surveillance Recorders Product Manual - Manual (Page 38)

37 DIGITAL VIDEO RECORDER
6.2. Alarm Setup
ITEM ADJUSTMENT
RECORD TIME
y Determines the duration of recording after the alarm signal has been
activated. [10SEC ~ 300SEC]
RECORD CAMERA
y ALL: Start to record All Alarm “ON” channel if there is any Alarm signal is
triggered.
y 1:1: Start to record the channel, which Alarm is triggered.
ALARM BUZZER
y ON: The buzzer Sounds if an alarm is triggered. The buzzer will sound for
the duration of the RECORD TIME. This buzzer related with Alarm
Out. Please configure Alarm Out “ON” for Alarm buzzer.
yOFF: Disables the ALARM BUZZER function.
ALARM OUT1
y Configure which relay will be triggered when an alarm is activated per
camera. Select from four available options:
Video Loss, Motion, Alarm ALL, Each Alarm, System.
y Press [Cancel] button to stop Alarm Out.
It will be cleared by an order: Alarm>Motion> Video Loss
6. Save changes and exit the menu, press [ENTER] button.
7. Press [REC] button after setting RECORD ENABLE. Then, the red REC LED lights on
the front panel and recording starts.
<Note> If “System” is selected, the relay will be triggered when System
has problems such as HDD FAIL, Power loss etc.
<Note> Press [-] button to stop the buzzer immediately. Stopping the
buzzer does not stop the alarm recording.