Blaupunkt Cleveland DJ31 - Manual (Page 11)

33
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
➮
Briefly press the BAND (TS) button
2
or the FMT button
2
to switch
between the memory levels and
frequency ranges.
Tuning into a station
There are various ways of tuning into
a station.
Automatic seek tuning
➮
Press the or button
<
.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manu-
ally.
➮
Press the or button
<
.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of
browsing through its so-called “broad-
casting network”.
➮
Press the or button
<
to
move to the next station on the
broadcasting network.
Note:
●
The RDS function must be activat-
ed before you can use this fea-
ture.
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use the scan or Travelstore function.
Setting the sensitivity of the
station search mode
You can configure the radio to only
tune into stations with a strong recep-
tion or to also tune into those with a
weak reception.
➮
Press the MENU button
=
.
➮
Keep pressing the or button
<
until “SENS HI” or “SENS LO”
appears in the display.
The display shows the currently set
value for sensitivity. “SENS HI6” means
that the tuner is highly sensitive. “SENS
LO1” means it is set to the lowest sen-
sitivity setting.
If “SENS LO” is selected, “lo” lights up
in the display.
➮
Set the required sensitivity using
the and buttons
<
.
When you have finished making your
changes,
➮
press the MENU button
=
.
Storing stations
Storing stations manually
➮
Select the required FM1 / FM2 /
FMT memory or one of the MW /
LW frequency ranges (only FM in
the case of the Dresden C31 and
Cleveland DJ31 units).
➮
Tune into the required station.
RADIO MODE