CHAMPION PP-28 Cleaning Guide - Manual

MAINTENANCE
MAINTENANCE
The efficiency and life of your machine is increased by regularly scheduled preventive maintenance.
A well maintained machine gives better results and service. An investment of a few minutes of
daily maintenance will be worthwhile.
The best maintenance you can provide is to keep your machine clean. Components that are not
regularly cleaned and flushed will clog and become inoperative.
Intervals shown in the following schedules represent an average length of time between necessary
maintenance. Maintenance intervals should be shortened whenever your machine is faced with
abnormal working conditions, hard water, or multiple shift operations.
CLEANING
Daily-Every 8 Hours of Operation
1. Turn power switch to OFF.
2. Drain the tank and flush with water.
2. Remove all scrap screens, scrap baskets and pull drain lever to drain water. Clean inside of
tank and flush with clean water. Backflush scrap screens and basket until clean. Do not strike
screens or basket against solid objects.
3. Remove the spray pipes. Remove the end plug from each spray pipe. Flush pipe and nozzles
until clean. Do not strike spray pipes against solid objects. Check bearings in arms to
ensure that they are clean of any debris and do not need replacing. Reinstall spra y pipes.
At the End of Day
1. Drain the machine.
2. Check and clean scrap screens, scrap basket and pump suction screen.
3. Clean the spray arms.
4. Wash inside of machine with fresh water (tank, sides and top).
CAUTION:
Do not hose down the exterior of the machine with water.
5. Leave the doors open to aid in dr ying the interior of the machine.
6. Clean the exterior of machine with a mild soap solution.
6. Check detergent and rinse aid additive, replenish if necessary.
7. Report any unusual conditions to your supervisor.
10
!