chiliGREEN 15 4 M665S - Manual (Page 108)

Modules & Options
7 - 10 PC Camera Module
7
PC Camera Driver Installation
1.
Make sure the module is powered on (click Cancel if you see a “ New
Hardware Found ” message ) , and then insert the Device Drivers & Utilities
+ User’s Manual CD-ROM into the CD/DVD drive.
2. Click 10.Install Camera Driver > Yes.
3. Choose the language you prefer and click Next.
4. Click Next > Install.
5. Click Finish to restart the computer.
6. Run the BisonCap application program from the BisonCam shortcut on the
desktop, or from the BisonCam item in the Start > Programs/All Pro-
grams menu (if the hardware is turned off use the Fn + F10 key combina-
tion to turn it on again).
7. You can use the application button to run the BisonCap application if
you have installed the hot key driver (see “Hot Key Utility” on page 4 - 7 ).
8. A Snapshot folder will be placed on the desktop to record still pictures
taken with using the application button (see “PC Camera Hot Key But-
tons” on page 7 - 18 ).