chiliGREEN 15 4 M665S - Manual (Page 158)

Windows XP Information
D - 14 Display Devices (VIA)
D
Display Devices (VIA)
Besides the built-in LCD, you can also use an external monitor (CRT)/flat panel dis-
play as your display device. Connect it to the external monitor port on the right of the
computer. See the instructions below:
1. Attach the external display to the external monitor port and turn it on.
2. Click Advanced in the Display Properties control panel (see
“Video Features” on
page D - 10 ) to display the additional tabs.
3. Select S 3Display (tab).
4. Click to put a tick in the tickbox under the CRT icon.
5. Click Apply > OK and allow the monitor time to refresh the display.
6. Click Yes to confirm the settings.

S3Tray Plus Utility
You can also use the
S3Tray Plus utility in
the taskbar to config-
ure an external dis-
play.
Attach the external dis-
play (CRT) to the ex-
ternal monitor port.
Right-click the
icon in the taskbar and
select S3Display.
Select the CRT (it
should have a tick
alongside it) and click
Yes to confirm the set-
tings.
Figure D - 10
S 3Display