chiliGREEN B5130 - Manual (Page 29)

Concise User’s Guide
3.75G/HSPA Module - 25
Engl
ish
7. You will need to enter the Access Point Name and phone
Number as supplied by the service provider.
8. Click Save to save the profile.
9. Click the newly created profile in the profile window and then
click Default (button) to set the profile as the default
connection (note that only one profile may be stored as the
default connection).
10. The newly created profile will now be stored as the default
connection when you click Connect in the Connection
Manager Home screen.
11. To use a profile click to select it, and then click Apply (button)
and the settings will be transferred to Connection Manager.
Choosing a Profile
1. Access the Connection Manager from the Start menu (Con-
nection Manager
), or (Start > Programs/All
Programs > BandLuxe > BandLuxe HSDPA Utility R11 >
Connection Manager).
2. Click the Menu > Profile.
3. Highlight the profile required and click Default.
4. Click OK to confirm.
5. YES will be displayed alongside the chosen default profile.
Editing a Profile
1. Access the Connection Manager from the Start menu (Con-
nection Manager
), or (Start > Programs/All
Programs > BandLuxe > BandLuxe HSDPA Utility R11 >
Connection Manager).
2. Click the Menu > Profile.
3. Highlight the profile required and click Edit.
4. You will then be able to access the General tab (you will need
to confirm with your service provider for any changes to make
here, and the other tabs are generic to Windows)

New SIM Card
If you switch to a different SIM card, then the default pro-
file will no longer be valid. You will need to create a new
profile as described here. If you do not have access to all
the information necessary to create a new profile you
should uninstall the BandLuxe software and then reinstall
it. The new default profile should obtain the information
from the SIM card.
B5130 n B7130 Concise UG.book Page 25 Tuesday, August 31, 2010 4:24 PM