chiliGREEN M7NCD-Ultra - Manual (Page 13)

11
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 2-3 Close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 Close”.
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
Case Open Connector: JC1
Pin
Assignment
1
Case Open Signal
1
JC1
2
Ground
CD-ROM Audio-In Header: JCDIN1
Pin Assignment
1 Left Channel Input
2 Ground
3 Ground
1
JCDIN1
4 Right Channel Input
Front Panel Audio Header: JF_AUDIO1
10
9
2
1
JF_AUDIO1
Pin Assignment Pin Assignment
1 Mic In/ Center 2 Ground
3 Mic Power/ Bass 4 Audio Power
5 Right Line Out/ Speaker
Out Right
6 Right Line Out/ Speaker
Out Right
7 Reserved 8 Key
9 Left Line Out/ Speaker
Out Left
10 Left Line Out/ Speaker
Out Left
Digital Audio Connector: J_SPDIF1
Pin Assignment
1 +5V
2 SPDIF_OUT
1
J_SPDIF1
3 Ground