chiliGREEN P4TSP-D2 - Manual (Page 8)

6
CPU Fan Header: JCFAN1
Pin Assignment
1 Ground
2 +12V
1
3
JCFAN1
3 FAN RPM rate Sense
System Fan Header: JSFAN1
Pin Assignment
1 Ground
2 +12V
3 1
JSFAN1
3 FAN RPM rate Sense
DDR DIMM Modules: DDRA1/ DDRA2
DRAM Access Time: 2.5V Unbuffered/ no registered (without ECC) DDR SDRAM
PC2100/ PC2700/ PC3200 Type required.
DRAM Type: 128MB/ 256MB/ 512MB/ 1GB DIMM Module. (184 pin)
DIMM Socket
Location
DDR Module Total Memory
Size (MB)
DDRA1 64MB/128MB/256MB/512MB/1GB
*1
DDRA2 64MB/128MB/256MB/512MB/1GB
*1
Max is
2GB
***Only for reference***
Installing DDR Module
1. Unlock a DIMM slot by pressing the retaining clips
outward. Align a DIMM on the slot such that the
notch on the DIMM matches the break on the slot.
2. Insert the DIMM vertically and firmly into the slot
until the retaining chip snap back in place and the
DIMM is properly seated.