chiliGREEN Card Reader UCR-61S2B Q&A - Manual

Card Reader UCR-61S2B Q&A:
To avoid any installation problems, acquire update information or any questions occur, users are welcome
to the website: www.i-buddie.com.tw\card reader\ucr-61s2b.html .
You can also obtain more product information from this website.
Warning:
Do not remove or insert a storage card, nor disconnect the USB extension cable while transmitting
data. To avoid improper shutdown or opening a transmitted file from a new location,
please ensure the transmission is completed.
Hardware:
Q1: How can I use this USB card reader?
A1:a. Open your PC case.
b. Find out USB pin headers on the motherboard.
c. Please read your motherboard manual introduction on the USB pin header definition before plugging
your card reader. Make sure the pin header definition is same as the card reader s below:
Red --- VCC
Black --- GND
White --- Data-
Green --- Data+
d. Plug in the card reader cable.
3
Note: Please check the pin assignment of cable and USB headers
on the mainboard. Make sure the correct pin assignment before
plugging in. Any incorrect usage may cause the system
unexpected damage. The vendor will not be responsible for any
incidental or consequential damages arising from the usage or
misusage of the purchased product.