COATS Autoflate Nitrogen - Manual

In these units, from the keyboard you can access only one N2 parame-
ter, which is the BL 2 "Nitrogen purge percentage". This parameter
defines the percentage that the tire will be deflated to after reach-
ing the set point on the first inflation.
To change it, press the “I” button once, wait a second, the center
light on the keyboard will flash and beep. Immediately after that
press the minus button “-“followed by the “I” button again (quickly).
The unit will display BL 2 and them its value "100". Then, using the
plus key set the value you want.
For example if you set BL2 for 20, and if the unit is preset to in-
flate a tire to 35Psi, the unit will inflate the tire to set pressure
- 35PSI, then it will deflate to 7 PSI and then re-inflate to 35.
Stops and beep.
Manufacturer of Ammco®, Coats® and BADA® Automobile Service Equipment, Tools and Accessories
1601 J.P. Hennessy Drive LaVergne, TN 37086-3565 800-688-6496 or 615-641-7533
Hennessy Canada: 2430 Lucknow Drive, Unite 9, Mississauga, Ontario L5S 1V3 905-672-9440
www.ammcoats.com
For Technical and Service Information call 866-455-8768
COATS AUTOMATIC
DIGITAL INFLATORS
NITROGEN INSTRUCTIONS
Autoflate Air-Check