COATS Balancer Adapter Wall Storage Board Kit - Manual

8113225 02 02/08 © COPYRIGHT ALL RIGHTS RESERVED PRINTED IN U.S.A.
Balancer Adapter
Wall Storage Board Kit
Balancing Solutions
Before You Begin
The Wall Storage Board Kit consists of the following parts:
Item Part No. Qty. Description
Ạ 8113093 1 Storage Board
ạ
8113094 13 Hook
Ả
8107091 13 Grip
ả 8106303 26 3/8-16 UNC Locknut
Verify that you have received all of the parts listed.
Assembly and Installation
1. Install the Grips onto the Hooks if not already installed. (Fig. 1)
2. Install each Hook onto the Storage Board using two 3/8-16 UNC
Locknuts as shown in figure 1. Handtighten the Locknuts (very snug),
leaving the threaded portion of the Hook flush with the Locknut. Make
sure the Hooks are pointing upward toward the label.
3. Mount the assembled Storage Board (fig. 2) in the desired location.
Figure 2 - Assembled Wall Storage Board
Figure 1 - Hook Assembly Diagram
Ạ
ạ
Ả
ả
Mounting
Hole
Mounting
Hole
Mounting
Hole
Mounting
Hole