Balancing solutions, Application chart glossary – COATS Application Chart, Balancing Solutions User Manual
Page 9
COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 • (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.Hennessy-Ind.com
The bolt circle information appearing on this chart is copyright © 2001 by ADP Claims Solutions Group, Inc. All rights reserved.
© Copyright 2001 HENNESSY INDUSTRIES and COATS, Inc. All rights reserved. Printed in U.S.A.
Hennessy Industries has made a reasonable effort to ensure that the information in this chart is correct
and cannot be held responsible if any inaccuracy exists. All rights reserved. rev. 0, 08/01
Balancing Solutions
Application Chart Glossary
®
Pin-Plate™
Balancing Solutions
Page 9 of 12
8110410
Cone, Small - 1.125" (28MM) I.D.,
Range: 1.75"-2.25" (44.45-57.15MM),
(3 Cone System - From March 1992)
8110411
Cone, Medium - 1.125" (28MM) I.D.,
Range: 2.25"-3.00" (57.15-76.20MM),
(3 Cone System - From March 1992)
8110412
Cone, Large - 1.125" (28MM) I.D.,
Range: 3.00"-3.60" (76.20-91.44MM),
(3 Cone System - From March 1992)
8111688
Cone, Toyota Tacoma Truck, Back
Cone, 1.125" (28MM) I.D. Range:
3.25-4.38" (82.55-111.13MM)
8111935
Spacer, Light Truck & Viper Back
Cone, Allows back coning of wheels
with up to 5.20" (132.08MM) Center-
holes
8112098
Cone, Small, 40MM I.D., Range: 1.75-
2.25" (44.45-57.15MM)
8112099
Cone, Med., 40MM I.D., Range: 2.25-
3.00" (57.15-76.20MM)
8112100
Cone, Large, 40MM I.D., Range:
3.00-3.60" (76.20-91.44MM)
8112101
Adapter, Large, 40MM I.D., Range:
3.375-5.20", (85.73-132.08MM)
8112168
Cone, Med., B1, 1.125" (28MM) I.D.,
Range: 2.25-3.00" (57.15-76.20MM)
8112170
Adapter, Large, D1, fits IBS 2000 only
8112384
WHILE SUPPLIES LAST Cone, Toyota
Tacoma Truck, Back Cone 40MM I.D.,
Range: 3.25-4.38" (82.55-111.13MM)
8112420
Short Cone, Balancer, 1.125" (28MM)
I.D., Range 2.650"-3.025" (67.31-
76.84MM)
8112421
Short Cone, Balancer, 40MM I.D.,
Range 2.650"-3.025" (67.31-76.84MM)
8112760
Stud-Plate Adapter, 5x5.5" Bolt Circle,
1.125" (28MM) I.D., Used on Light
Truck Wheels