COATS Kit 8113645 Radial Runout Sensor Adjustment Kit - Manual

Radial Runout Sensor
Adjustment Kit #8113645
COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565
(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
1. Retrieve the centering tool, o-ring bungee, and
string from the literature package.
2. Slightly loosen the u-bolt fasteners.
3. Position the centering tool on the radial runout
sensor’s adjustable slide.
4. Attach the string and o-ring bungee as shown.
5. Rotate pivoting bracket to position the string
between the two alignment holes.
6. Tighten the u-bolt fasteners. Be sure to maintain
the correct sensor adjustment positioning as indicated
by the centering tool alignment holes.
8113644 00 01/03 page 1 of 2
O-ring
Bungee
String
Alignment
Holes
U-bolt
Fasteners
Pivoting
Bracket
Centering Tool