COATS Monitor Set Up - Manual

CUSTOMER ATTENTION!!
— To Set Up (Unpack) Monitor —
1. Lift monitor up from the foam packing.
2. Feed excess cable length back through the elon-
gated hole in the monitor tray.
3. Place monitor (base down) on the monitor tray
gripping surface with cables in the slot under-
neath the monitor.
4. Nest the cables at the back of the monitor in the
groove at the back of the monitor tray.
5. Discard the foam packing.
Monitor Tray
Weight Tray
Foam Packing
Monit
or
Groove
for Cables
C
ab
le
s
8113879 00