COATS CDH-6330 Electric-Hydraulic Tire Changer - Manual (Page 26)

6
18 SCRAPPING A MACHINE
When your machine' s working life is over and it can no longer be used, it must be made inoperative by removing any connection to
power sources.
A
1

4

The manufacturer’s Serial plate is fixed on the back of the
machine. If gives the following information:
1- Manufacturer information
2- Model
3- Serial number
4- Phases
5- Voltage requirements
6- Frequency
7- Rated draw
8- Year
9- Weight
1 0 - Absorbed power
19 DATA ON SERIAL PLATE
These units are considered as special waste material, and
should be broken down into uniform parts and disposed of in
compliance with current laws and regulations.
If the packing are not polluting or non-biodegradable, deliver
them to appropriate handling station.
WARNING!
If this machine catches fire, use dust or CO extinguishers only.
2
[1]
Type:
Volt: Amp: [5] [7] Kw: [10]
Hz: [6]
[2] Nr. [3]
Ph: [4] Year: [8]
Net Weight: 770 Kg. [9]
FAC -SIMILE