COATS Autoflate Warning Card - Manual

Autoflate™
Electronic Automobile & Light Truck Tire Inflator
Safety and Reference Guide
To Prevent Tire Explosions:
1) DO NOT Exceed 40 PSI To Bead
Seat.
2) DO NOT exceed tire manufac-
turer’s recommended air pressure.
3) DO NOT use device to inflate
small tires such as ATV, bicycle,
lawn mover, etc.
4) Use safety cage or similar con-
figuration and use extreme care.
Keep hands, arms, and entire body
away from the tire during the
remaining bead seat and inflation
procedures. Do not permit anyone
to stand over the tire as personal
injury could result.
5) ALWAYS read operating instruc-
tions before operating device.
To Stop Inflation, Press One:
, or
Displays Set Pressure
Use & To Set
Pressure
Note: Device Defaults To 32 PSI
Display Switches Between Set
Pressure & Tire Pressure
To assure correct final tire pres-
sure, clip-on air chuck must not
leak at attachment to tire valve.
The clip-on chuck installed on
the end of the inflator hose must
always be an open style with all
parts in proper working order to
assure safe operation.
WARNING
WARNING
DANGER
© COPYRIGHT 2007 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
85008901 02 04/09 1 of 2
Autoflate™
Electronic Automobile & Light Truck Tire Inflator
Safety and Reference Guide
To Prevent Tire Explosions:
1) DO NOT Exceed 40 PSI To Bead
Seat.
2) DO NOT exceed tire manufac-
turer’s recommended air pressure.
3) DO NOT use device to inflate
small tires such as ATV, bicycle,
lawn mover, etc.
4) Use safety cage or similar con-
figuration and use extreme care.
Keep hands, arms, and entire body
away from the tire during the
remaining bead seat and inflation
procedures. Do not permit anyone
to stand over the tire as personal
injury could result.
5) ALWAYS read operating instruc-
tions before operating device.
To Stop Inflation, Press One:
, or
Displays Set Pressure
Use & To Set
Pressure
Note: Device Defaults To 32 PSI
Display Switches Between Set
Pressure & Tire Pressure
To assure correct final tire pres-
sure, clip-on air chuck must not
leak at attachment to tire valve.
The clip-on chuck installed on
the end of the inflator hose must
always be an open style with all
parts in proper working order to
assure safe operation.
WARNING
WARNING
DANGER
© COPYRIGHT 2007 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
85008901 02 04/09 1 of 2