COATS Instructions for Bonding Shoe Bootie - Manual

Instructions For Bonding Your
Shoe Bootie
COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565
(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
1. Remove all dirt and build up from the front and
rear surfaces of the metal bead loosener shoe with a
scraper.
2. Apply the adhesive in a zig zag pattern to the front
and rear sides of your metal bead loosener shoe.
3. Place the bootie over the metal shoe and allow
the adhesive to set up for at least 45 minutes before
use.
4. Save the remaining adhesive for bonding applica-
tion of the second shoe bootie.
Important: Review instructions and warnings on
adhesive label prior to using adhesive for MSDS infor-
mation on adhesive call 1-800-767-4667.
Glue
(Both Sides)
Metal
Shoe
Shoe
Bootie
8183652 00 07/04 © COPYRIGHT 1998 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.