COATS Kit 85000675, Air Inflator Mounting User Manual
COATS Equipment
85000674 01 01/09
© COPYRIGHT 2007 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
Air Inflator Mounting Kit 85000675
For use with a Coats 85009939 Air-Check™
Inflator or an Excel Brand Air Inflator
Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
Shown for Reference
Only, Not Part of Kit
4
Shown for
Reference Only
Not Part of Kit
9
3
2
1
7
5
8
6
Coiled inflate
air hose
not shown.
Connect 8113417 1/4-inch
air hose to air inflate unit
securing with hose clamp
8101428 and connect to
proper air source.
Feed 1/4-inch air hose
8113417 and power cord
from air inflate unit thru
center of tube as shown.
10
11
COATS
Unit
EXCEL
Unit
Note:
The Coats Air-Check™ inflator and the Excel
Air Inflator are customer supplied parts and ARE
NOT included in this kit.
Ref.
Part No.
Description
*1
8000378
1/4" Brass St. Fitting
*2
8101428
1/4-inch Hose Clamp
3
8102459
Self Tapping Bolt
4
8106301
1/4" Hex Hd Self Tap Screw, Gr.5
5
8120325
5/16 x 1.00 Serrated Washer Hd. Screw
6
8181183
5/16-18 Nylon Insert Lock Nut Gr.5
*7
8113417
Black Rubber Hose, 1/4 ID x 120"
8
85000199
Arm Stop Trim Strip
9
85000649
Air Inflate Mounting Bracket
10
871100805
HHCS Screw, 1/4-20 x 3/4
11
8181369
.250-20, Nylock Hex Nut
*For use with the Excel brand inflator. These also come stan-
dard with the Coats Air-Check™.