COATS Kit 85606462, Duckhead Roller User Manual
Page 2
Advertising
85600311 01 09/11
© COPYRIGHT 2008 HENNESSY INDUSTRIES AND COATS ALL RIGHTS RESERVED PRINTED IN U.S.A.
3b. Pull the ring on the duckhead roller to engage it
to the arm bracket, (figure 5). Note that pulling the ring
will also disengage the duckhead roller from the arm
bracket.
Figure 5 - Pull Ring/Pin To Engage Duckhead Roller
4. Use RoboArm™ to push down on tire 90 degrees
clockwise from duckhead to allow bead to utilize drop cen-
ter area of rim. Apply extra lubricant to mount upper bead.
Figure 6 - Use RoboArm To Hold Tire In Rim Drop Center
5. Depress table top pedal and rotate tire until bead
is mounted. Be careful to ensure bead stays in the rim
drop center in the area ahead of duckhead.
Figure 7 - Mounting Top Bead
Valve
Advertising