COATS Kit 85607770 Tire Inflation Cage - Manual (Page 4)

4 • COATS
Before You Begin
Read all of this instruction manual and understand
all of the steps involved before beginning. Becoming
familiar with the setup process before beginning will
help you successfully complete the kit setup and avoid
damaging your tire changer, accidentally discarding
required parts, or reinstalling incorrect parts.
WARNING
Risk of explosive release of compressed
air and flying parts and debris during tire
seating and tire inflation. You can be killed,
blinded, or seriously injured.
- Read, Understand, and Follow All Instructions
- Adhere to Federal Regulations for Tire Mounting
- Wear Safety Goggles
WARNING
It is NOT SAFE to use the Tire Inflation Cage
for inflation of the following type of tires.
• Tires Defined as Truck Tires
• Tires on 2-piece Rims
• Small Tires (Rim Smaller than Cage Tube
Spacing)
CAUTION
Always DISCONNECT THE ELECTRICAL
POWER before servicing equipment. This
prevents electrical shock or accidental
movement of the systems operated by the
electrical power.
CAUTION
Always DISCONNECT AIR SUPPLY before
servicing equipment. This prevents acciden-
tal movement of systems operated by com-
pressed air which may result in personal
injury. BLEED THE AIR SYSTEM by actuating
all the valves.
CAUTION
Always wear safety goggles to protect your
eyes.
ALWAYS
WEAR
SAFETY
GOGGLES
DO NOT REACH
INTO CAGE
DURING
INFLATION
DO NOT
STAND IN
C O
OK
DO NOT STAND IN
TRAJECTORY ZONE
DO NOT REACH INTO CAGE
DURING INFLATION
ALWAYS WEAR SAFETY
GOGGLES