COATS Kit 85607967 Inflation Cage Bracket - Manual

85607968 00 05/12 1 of 2 © Copyright 2012 Hennessy Industries and COATS All Rights Reserved
Tire Inflation Cage Attachment
Bracket Kit 85607967
For use with COATS APX Tire Changers
Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
Instructions
Before beginning this modification or attempting
any maintenance, remove the electrical power and air
source from the machine; also, bleed off any stored
compressed air by exhausting through the air blast foot
valve.
1. With a speed handle and 3/8-inch socket, remove
the two bolts that fasten the tool/lube holder bracket to
the machine. Reserve fasteners.
2. Use reserved fasteners to bolt tool/lube holder
bracket and cage bracket A to machine inflation tower.
Align brackets and insert fasteners through the bracket
plates and tower, then secure.
3. Remove four bolts to open the inflation tower
access panel.
4. Use five 3/8-16 x 7/8 inch bolts and 3/8-16 nuts to
fasten cage bracket B to machine inflation tower and
cage bracket A. Align bracket B and insert fasteners
through the bracket plates and tower, then secure.
5. Reinstall the inflation tower access panel.
6. Use two 3/8-16 x 7/8 inch bolts and 3/8-16 nuts to
fasten cage bracket C to cage bracket A. Align bracket
C and insert fasteners through the bracket plates, then
secure via bracket B access hole.
7. Refer to the Tire Inflation Cage Kit 85607770
instructions for its attachment and setup procedure.
8. Reconnect the air and electric supply to the
machine. Test the machine for full function before
returning the machine to operation.
Cage Bracket B
Mounted On Machine
Position Brackets And
Fasten To Machine
Cage Bracket Mounting Configuration
APX Tire Changer
Tire Inflation Cage
Kit 85607770
Bracket C
Bracket B
Bracket A Access For
Bracket C
Access Panel