COATS Kit 85607983 Locking Swing Arm - Manual (Page 2)

2 • Important: Always read and follow the operating instructions.
Locking Swing Arm
Installation
CAUTION
Always DISCONNECT THE ELECTRICAL
POWER before servicing equipment. This
prevents electrical shock or accidental
movement of the systems operated by the
electrical power.
CAUTION
Always DISCONNECT AIR SUPPLY before
servicing equipment. This prevents acciden-
tal movement of systems operated by com-
pressed air which may result in personal
injury. BLEED THE AIR SYSTEM by actuating
all the valves.
Parts Identification
Item Part No. Description
1 85607820 Adjusting Lock Knob
2 85000317 5/16-18 x 1-1/2 HSWHCS Screw,
Zinc
3 8107635 5/16-inch Plain Washer
4 85607814 Swing Arm Lock Plate
5 83030571 Lock Block
6 7000230 1/2 x 3 Handle Grip
Tools Required:
Grease
Threadlock
Snap Ring Pliers
Allen Wrenches
Wrenches, 1-1/8", 1-1/16", 3/4", 5/8", 1/2"
Grease
Threadlock
Allen
Wrenches
Wrenches
Snap Ring
Pliers
1
2
3
4
5
6
Apply Grease To These Locations
Swing Arm Locking Mechanism
(Leverless Unit)