Bar code control – Brother HL-3260N User Manual
Page 265
APPENDICES
Appendix–23
B
B
a
a
r
r
C
C
o
o
d
d
e
e
C
C
o
o
n
n
t
t
r
r
o
o
l
l
The printer can print bar codes in the HP LaserJet, EPSON
FX-850 and IBM Proprinter XL emulation modes.
Print Bar Codes or Expanded Characters
Code
ESC i
Dec
27 105
Hex
1B 69
Format:
ESC i n … n \
Creates bar codes or expanded characters according to the segment of
parameters “n … n”. For further information about parameters, see the
following “Definition of Parameters.” This command must end with the
“ \ ” code (5CH).
[Definition of Parameters]
This bar code command can have the following parameters in the parameter
segment (n … n). Since parameters are effective within the single command
syntax ESC i n … n \, they don’t take effect in the subsequent bar code
commands. If certain parameters are not specified, they take the default
settings. The last parameter must be the bar code data start (“b” or “B”) or
the expanded character data start (“l” or “L”). Other parameters can be
specified in any sequence. The prefix of each parameter can be a lower-
case or upper-case character: for example, “t0” or “T0”, “s3” or “S3”, etc.