COATS Wheel Lift for use with 9024E Rim Clamp Tire Changer - Manual (Page 4)

4 • COATS Tire Changer Accessory
6. Remove the hose, shown in fig. 11, from the
new Front Pedals Cover with built-in Wheel Lift
UP/DOWN Movement Control.
7. Set the hose into the hole shown in fig. 12 & 13.
8. Find the distributor block, shown in fig. 14, on
the bottom of the machine body.
9. Identify the hose, shown in fig. 15, and cut it at
2-inch (5cm) from the union placed on the distributor
block.
10. Set the supplied T-union on one of the hose
ends, as shown in fig. 16.
11. Connect the other end of hose, as shown in
fig. 17.
5 Fig. 17
5 Fig. 16
5 Fig. 15
5 Fig. 14
5 Fig. 13
5 Fig. 12
5 Fig. 11
Distributor
Block
Hose
Hose
T-Union
Hose
Hose
Hose