COATS 6060 AX/EX Tire Changer - Manual (Page 4)

Principal Operating Parts
Tower — Support for horizontal and vertical
slides, also air storage tank.
Air Inflation Gauge — Registers tire pressure
when clip-on chuck is attached to valve stem
and inflation pedal is released.
Inflation Pedal — Single position pedal allows
input line air pressure to flow through the clip-
on chuck. Provides line air pressure through the
bead sealing jets on the tabletop.
Clamp Control Pedal — Three position pedal
that opens and closes rim clamps.
Table Top Pedal — Three position pedal that
controls rotation of table top.
Table Top — Rotating chuck for tire changing.
Clamps — Secures wheel to table top for tire
changing.
Adjustable Clamp (AX/EX) — Adjusts outward
to allow outside clamping of wheels up to 21”.
Lube Bottle — Dispenser for rubber lubricant.
Combination Mount/Demount Head —
Mounts and demounts tire from wheel.
Swing Arm Adjustment Knob — Adjusts
swing arm/vertical slide assembly for proper
horizontal positioning of mount/demount head.
Vertical Slide Locking Handle — Locks and
unlocks vertical slide and sets correct vertical
position to maintain head/wheel clearance.
Bead Lifting Tool — Used to lift and position
tire bead correctly on mount/demount head.
Bead Loosener Shoe — Pivoting shoe for
loosening tire beads.
Bead Loosener Handle/Button — Controls
operation of bead loosener shoe.
Oil Check Dipstick — Transmission oil level.
Bead Sealing Nozzles — Expands tire
sidewall to bead seat area of rim to seal and
allow inflation.
Pressure Safety Valve — High pressure safety
valve set to exhaust at line pressures above
185 PSI.
Release Valve — Allows the manual release of
air pressure from tire.
Inflation Guard – Tubular structure to help
protect operator from physical danger during
inflation process.
Inflation Control Panel – Inflation of tire is
controlled by these two levers. Operator must
actuate both levers from behind the barrier tubes to
inflate tire.
2 • COATS 6060AX/EX Rim Clamp Tire Changer
1
2
8
7
6
5
4
3
9
10
11
12
13
14
15
16
17
18
19
20
21
Know Your Unit
Compare this illustration with the unit before placing it into service. Maximum performance and safety will be
obtained only when all persons using the unit are fully trained in its parts and operation. Each user should learn
the function and location of all controls. Prevent accidents and injuries by ensuring the unit is properly installed,
operated, and maintained.
1
2
3
5
6 7 8
9
10 11
12
13
14
15
16
17
18
19 20
21
4