COATS 9024E Tire Changer - Manual (Page 6)

2 • Important: Always read and follow the operating instructions.
Principal Operating
Parts
Know Your Unit
Compare this illustration with the unit before placing
it into service. Maximum performance and safety will
be obtained only when all persons using the unit are
fully trained in its parts and operation. Each user should
learn the function and location, of all controls.
Prevent accidents and injuries by ensuring the unit is
properly installed, operated and maintained.
Do It Now!
Now is a good time
to fill out the Owner’s
Registry Card.
Ạ
Tower — Support for horizontal and vertical
slides.
ạ
Air Inflation Gauge — Registers tire pressure
when clip-on chuck is attached to tire valve stem
and inflation pedal is released.
Ả
Release Valve — Allows the manual release of
air pressure from tire when clip-on chuck is
attached to tire valve.
ả
Left Helpers and Support — Includes
mount/demount helpers, slide, cylinder, and valve
for operation.
Ấ
Inflation Pedal — Three-position pedal that
allows inflation of tires through air hose and clip-
on chuck.
ấ
Bead Lifting Tool — Used to lift and position tire
bead correctly on duckhead ® .
Ầ
Clamps — Holds wheel to tabletop for tire
changing. Position outward to allow outside
clamping of wheels.
ầ
Right Helpers and Support — Includes
mount/demount roller and disk, slides, cylinder and
valve for operation.
Ả
ả
Ầ
ầ
Ấ
ấ
ạ Ạ
✓