COATS Extended Mobility (EMT) RunFlat Tires - Manual (Page 11)

The Objective of this Section:
To clearly identify the safety issues related to tire service and inflation procedures.
Safety Issues Related to this Section:
• Operator Protective Equipment.
• Definitions of Hazard Levels.
• ALWAYS use a safety cage for bead seating and inflation of EMT/RunFlat Tires.
• NEVER inflate tire above manufacturer’s recommended pressure after bead is seated.
This instruction manual is intended to supplement the Operating Instructions manual pro-
vided with your tire changer. Read and understand the entire manual before servicing any
tire or wheel. Read and follow all the CAUTION, WARNING, and DANGER notations in the
manual as they apply to these instructions as well. This manual is intended to act only as
an information supplement, and does NOT replace your Operating Instructions manual.
These exceptionally stiff sidewall tires use super-reinforced sidewalls and stiffer compo-
sition materials. It is very difficult to mount and demount. These tires may be used on
expensive custom wheels that are easily scratched or damaged. These tire/wheel assem-
blies will include a low-pressure sensor affixed to the inside of the wheel–either as a strap
on addition or a one-piece valve stem sensor. The operator must use extra care and cau-
tion when working with these tire/wheel/sensor combinations to avoid costly damage to
any of the individual components. These special combinations require changes to the
standard mount/demount instructions for your tire changer.
OPERATOR PROTECTIVE EQUIPMENT
Personal protective equipment helps make tire changing safer. However, equip-
ment does not take the place of safe operating practices. Always wear durable
work clothing during tire service activity. Shop aprons or shop coats may also
be worn, however loose fitting clothing should be avoided. Tight fitting leather gloves are
recommended to protect operator’s hands when handling worn tires and wheels. Sturdy
leather work shoes with steel toes and oil resistant soles should be used by tire service
personnel to help prevent injury in typical shop activities. Eye protection is essential dur-
ing tire service activity. Safety glasses with side shields, goggles, or face shields are
acceptable. Back belts provide support during lifting activities and are also helpful in pro-
viding operator protection. Consideration should also be given to the use of hearing pro-
tection if tire service activity is performed in an enclosed area, or if noise levels are high.
Definitions of Hazard Levels
Identify the hazard levels used in this manual with the following definitions and signal
words:
Watch for this symbol:
It Means: Immediate hazards which will result in severe personal injury or death.
Watch for this symbol:
It Means: Hazards or unsafe practices which could result in severe personal injury or death.
Watch for this symbol:
It Means:Hazards or unsafe
practices which may result in minor personal injury or product or property damage.
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE BEGINNING. KEEP THESE
INSTRUCTIONS IN A BINDER NEAR THE MACHINE FOR REFERENCE BY SUPERVISORS
AND OPERATORS.
Safety B–1
15
min
Stop Time
B
!
DANGER
!
WARNING
!
CAUTION
!