Comelit MT HDCAM360A - Manual (Page 20)

20
Command list
For camera 1 to 4 it is possible to define 3 Preset points that will be use for the
Preset Cruise (76 + Preset) and the Preset Sequence display (66 + Preset)
To define Preset 1 on camera 1:
Call camera 1
Select your preset view by adjusting with the joystick
Press 1 then press PRESET button 3 sec until you hear a bip (OSD will display
on screen POINT1)
(Setting may differ from the type of RS485 device you are using)
Same for the other preset
Call Preset 95: displays the menu of the 360° camer a
Call Preset 94: will apply immediately the selected mode
Call preset 93: after you selected your desired mode and that you position the
view of the camera, you can save the current view by calling Preset 93. OSD
will display on screen SAVE
Call Preset 76: run the auto pan function. OSD will display on screen TOUR
This function is also available on the keyboard by pressing directly AUTO PAN
hot key. In this mode the motion detection will be disabled
Call Preset 66: displays each preset without transition. Ideal for preset whose
distance is very long. In this mode the motion detection will be disabled. OSD
will display on screen SCAN
Motion detection and tracking
This camera has a motion detection feature and tracks a moving object in the
field of view. For configuration without dvr it can be a good alternative for live
monitoring
Due to the high level of processing for the CPU, it can be activated on one
channel only.
It doesn’t apply for 180° and 360° view.