Comelit MT 40705 - Manual (Page 30)

6.2.1 Keys for Dome camera
dome camera.
Exits from currently running functions or menu, error status, etc.
Deletes selected value or function in programming mode
+ ENTER: Night shot mode, : Normal mode
Calls Auto panning function (e.g., 2 + SCAN repeats Auto Scan 2).
will invoke Keyboard set up menu
will start recording when in the pattern programming menu.
Pan control, Cursor Left / Right or Page scroll in the Menu.
24
Function Key Label Descriptions
Camera
Selection
+
Displays the selected camera on the spot out of the multiplexer and allows the
camera to be controlled by the keyboard controller, if the selected camera is a
Function number selection with function keys.
(e.g., 1 + CAM , 3 + TOUR , 5 + SCAN , 6 + PRST )
Cancel
Cancels current inputs.
Alarm
Disregards all currently activated alarms and turns off the beep temporarily. If
alarm is activated again within the programmed hold time, the timer will restart
and beep again.
Relay ON Relay No. ~ + will activate the selected relay.
Relay OFF Relay No. ~ + will disable the selected relay.
Home
Immediately calls Home function.
Global
Sends all cameras to preset (e.g., 1, ).
Call Preset
position
Pressing Prst will bring up the preset programming menu.
Recalls preset;( e.g.; ,
… … + )
In the preset or tour programming mode, the operator can review the exiting
preset (selected by cursor) by pressing this key.
Tour
Pressing TOUR will bring up the tour programming menu directly
Recalls programmed presets or functions sequentially. (e.g., 1 + TOUR )
Pattern
Pressing PTRN will bring up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. (e.g., 1 + PTRN )
Auto Scan
Pressing Scan will bring up the Auto Scan programming menu.
Configuration
Enters programming menu.
Program
No. +
+
+
CTRL +
+
+
PRST will store current view as a preset directly.
will open programming menu
will open programming menu No. CTRL TOUR
No. CTRL SCAN
Control
CTRL+Joystick : In a programming mode (Preset, Pattern, Scan, Privacy….)
the joystick operates as if in the normal control mode.
While pressing and holding down the
key, all movements of the joystick
:, In normal operation mode, manual speed of the joystick
control will be operated in turbo mode.
Enter
Completes entering data for the password or title
: Direction key in DVR remote mode or Mux ( PTZ, Mouse,
Cursor)
Manual
Focus
Overrides auto focus. Moving the Zoom handle reactivates Auto Focus mode.
Manual Iris Overrides auto iris. Moving the joystick reactivates Auto Iris mode.
Zoom Zoom control.
Joystick
Twist ,Up / Down
Left / Right
Zoom control (proportional to position) Tilt control, Cursor Up / Down in the menu
ENTER+Joystick
CTRL+Joystick
CTRL
CTRL+MENU
PRST 2 4 0 3 1 2 1
2 … 5 5 + ENTER
9 9 9 + ENTER : 8 8 8
OFF 4 1
ON 4 1
No.