Condux Mini-Blower/Pusher - Manual (Page 10)

10
3. Adjust down pressure on cable by tightening the spring tensioned down pressure
adjustment to ensure positive contact with drive roller. (See figure 11)
4. Connect the air hose to the blower utilizing the universal claw type connector.
(See figure 12) Connect hose to air compressor follow specific manufacturer’s
instructions.
!wARNING: forced air creates flying debris. Always wear personal protective
equipment. Severe personal injury could result.
!wARNING: Ensure no personnel are in the destination access vault during the
blowing operation. Severe personal injury could result.
B. OPERATIONS
1. Select the drive system and connect utilizing
the drive stem. (See figure 13)
Important: make sure drive system is
oriented to turn the drive roller in the
proper direction.
Note: It is not recommended to run corded
or cordless drills in reverse for extend
periods of time.
figure 11. Adjust Pusher
Down Pressure
figure 12. Connect Air
figure 13. Select Drive