CounterPath Bria Android Edition 3.1 User Guide - Manual (Page 56)

CounterPath Corporation
52
Passive Session Timer Controls the use of session timers on SIP accounts. The session timer is used to determine if the
call is still active. Only choose Off if advised by your VoIP service provider.
• ON (default): Bria will not use session timers in any session, except it is explicitly required by
the remote party.
• OFF: Bria will use session timers in all sessions whenever the remote party supports and uses
it.
Enable IMS When On, Bria supports the IP Multimedia Subsystem. The default is Off. Subject to VoIP service
provider. Only choose ON if advised by your VoIP service provider. When On, Bria does the
following:
• Populates authorization header upon every SIP request right away, instead of after challenge.
• Uses the SIP account domain for authorization realm.
Keep Alive - Wi-Fi Interval A “keep alive” message is a mechanism for maintaining a “pinhole” through your firewall so that
phone calls proceed smoothly. The interval specifies how often the message is sent (in seconds).
If you are experiencing problems during a Wi-Fi call (a call made over the Wi-Fi internet
connection), try setting this interval to a lower number such as 20.
Keep Alive - Mobile Interval Same as above, except the interval applies to calls made over the mobile network.
Field Description