CounterPath Bria iPhone Edition 2.0 User Guide - Manual (Page 45)

Bria iPhone Edition User Guide
41
XMPP Accounts
To change these fields on an existing account, you must first disconnect the account or turn Enabled off for the
account.
Encrypt Audio If the transport is set to TLS, you can encrypt a phone call at the media (audio) level:
• Never: Audio is not encrypted.
• If Possible: On a given call, audio will be encrypted if the other person supports and is also
using audio encryption. If not, audio will not be encrypted.
• Always: Audio will always be encrypted. The call will fail if the other person cannot accept
encrypted calls.
Incoming Calls Typically ON, in order to receive calls. If OFF, you will not be able to receive calls using Bria.
Single Register Applies only if Global IP is ON.
• ON: Bria will register using a single register request.
• OFF (default): Bria will register using an unregister and a register.
Only choose ON if advised by your VoIP service provider.
Refresh Interval The timer interval between Bria’s attempts to register in order to refresh the account registration.
This value is placed in the “Expires ” header field of the SIP REGISTER message.
Change this value only if advised to do so by your VoIP service provider.
Keep Alive - Wi-Fi Interval A “keep alive” message is a mechanism for maintaining a “pinhole” through your firewall so that
the account registration is maintained. The interval specifies how often the message is sent (in
seconds).
If you are experiencing problems (for example, accounts become unregistered when using a Wi-
Fi connection), try setting this interval to a lower number such as 20.
Keep Alive - Cell Interval Same as above, except the interval applies to registrations made over the mobile data network,
which can be made on an iPhone (but not an iPod) when you are not in a Wi-Fi zone.
Field Description
Account Name Change the name as desired. For example, “Gmail”.
Enabled Typically On, in order to use the account for messages and presence.
Field Description