Dakota Ultrasonics MINI--MAX - Manual (Page 35)

MINI-MAX Ultrasonic Bolt Tension Monitor
29
2) Press the MEAS key multiple times to tab right through the menu fields,
and the ESC key multiple times to tab left through the menu fields, until
the desired hot function is highlighted.
Now that you’re familiar with activating and moving amongst the hot function
fields, let’s have a look at how to adjust or change the values of these fields:
Adjusting the Values of the Hot Menus
1) Use the UP, DOWN, LEFT, and RIGHT arrow keys to increase and
decrease the values of the hot function fields.
2) Repeat step 1 until the desired value has been achieved.
Alternatively, the delay, width, alen, gain, gate, temp, and threshold hot
function fields can be changed using the Digit Edit Box as follows:
1) Press the ENTER key to display the Digits Edit Box.
2) Press the UP and DOWN arrow keys to scroll the highlighted value.
3) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
4) Repeat steps 2 & 3 until the delay, width, alen, gain, gate, temp, or
threshold number is correctly displayed.
5) Press the OK key to set and return to the measure screen, or ESC to
cancel entering the delay, width, alen, gain, gate, temp, or threshold
value.