Dascom T5040 User Guide - Manual (Page 16)

Installation User Guide
8
Checking the printer
voltage Make sure that the device has been set to the correct voltage (e.g. 230 V
in Europe, 120 V in the USA). To do this, check the type plate at the
back of the printer. Contact your dealer if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect,
since this may result in severe damage to the printer.
Connecting the printer
Connect the power cable to the power inlet of
the printer. Connect the power cable plug to a
mains socket.
STOP
Type plate