DATOptic RM4_eSU3 RAID Manager - Manual (Page 20)

RM4_eSU3 RAID Manager User Guide Rev. 0.90 20 09/03/19
Page
20
2.2.2 Advanced RAID Configuration
For the advanced users, HW RAID Manager also provides them to do the advanced RAID
configuration to the connected disks.
The user is not only able to select the RAID type but also could select the desirable disks to build the
RAID. HW RAID Manager will depend on the status of the connected disks and provide the available
disks for users to select.
Figure 22 – Advanced RAID Configuration (Select Disks and Enter Password)
After applying the RAID configuration, the disk charts are updated and the supported RAID type will
also be updated according to the remaining of the available disks.