DATOptic eS3-PCIe12-U User Manual
DATOptic Hardware
eS3-PCIe12-U - Quick Reference Manual
P/N: eS3-PCIe21-U - 2x eSATA or SATA III PCI-Express Controller Card
Specification
Model Part Number
eS3-PCIe12-U: eSATA/SATA configurabel PCI-Express
(PCIe) Host Controller
Host Interface
PCI Express V2.0 5Gbps bus
Controller Interface
SATAIII - transfer rate 6Gbps fully compatible to SATA II
and SATA I
Connectors
2x eSATA or SATA connectors @ 6.0Gb per port
Power Requirement:
Operational Voltage : 3.3V/ DC
Operational Current :155mA ~ 400mA
Operating Temp.
0 C to 50 C
Operating Humidity:
5% to 95% non-condensing
System Requirements:
•
Computer with one available PCI-Express slot V2.0 prefer
INSTALLATIONS
eSATA or SATA configration:
Our card is eSATA / SATA port configurable, the defualt setting is 2x SATA ports enable.
To use eSATA or SATA ports, move the jumper as below.
J8 J7 J6 J5 J4 J3 J2 J1
J8 J7 J6 J5 J4 J3 J2 J1
° ° ° ° ° ° ° °
° ° ° ° ° ° ° °
° ° ° ° ° ° ° °
° ° ° ° ° ° ° °
° ° ° ° ° ° ° °
° ° ° ° ° ° ° °
Enable --> eSATA
eSATA Enable --> SATA
SATA
CON2 CON1 CON4 CON3
Hardware Installations:
1.
Power OFF PC and remove its cover.
2.
Select an empty PCI-express slot and insert the SATA Controller.
3.
Makes sure PCI is firmly sit in to PCIe slot
4.
Secure our host controller bracket with a screw.
5.
Close the PC’s cover. Turn PC ON.
For more detail, please refer to computer manual
Software Installation:
1.
Turn computer ON. When Windows boots up, If the AHCI already installed, it
will use Windows AHCI.
2.
To take the full advantage of our card, please use our drivers
For more detail please refer read me file in the zip file.
3.
Install our drivers and follow the instructons
Confirming Serial ATA Driver Installation
1.
Right click the My Computer icon and select properties.
2.
Click Device Manager in the Menu Tree.
3.
Click the “+” sign in front of IDE ATA/ATAPI controllers. AsMedia 1061 SATA
6G Controller should be seen
eS3-PCIe12-U offers as a driver-less SATA controller in MAC OS.
Just plug and play no driver required
For other OS, please use the latest AHCI drivers.
For support please contact us at:
DATOptic Inc.
1815 E. Wilshire Ave
Suite 906
Santa Ana, CA 92705
Phone: 714 558 1808
Fax: 714 558 3229
Email: support
@datoptic.com
Internet:
http://www.datoptic.com