DATOptic 2BAY_NAS - Manual (Page 7)

2 Bay 3.5” HDD SATA NAS
6
Setup the Date and Time
z Set time zone, current Date and Time, or to get the date and time by Network Time
Protocol Server from the list.
z Your old and new settings will be shown on screen, if new settings are correct then press
“Save” button to save configuration to
2 Bay NAS.
z If the new setting is not correct, click “Back” button to modify the correct
information again
z Double click the 2 Bay NAS name will launch browser (Microsoft IE), detail explained
in Chapter 3 Configuration of the
2 Bay NAS.