DATOptic T5_R5-eSUF - Manual (Page 21)

T5_R5-eSUF RAID Manager User Guide Rev. 0.90 20 09/03/19
Page
15
Figure 13 – Setting Password for new RAID
After selecting the RAID type and setting the password (optional), the user just need press the “Apply”
button to apply the configuration or press “Cancel” button to restore to the original disk state.
If the user wants to delete the existing RAID, the user could select the “DELETE ALL RAID” button to
delete the RAID and apply it.
When the user presses the “Apply” button, it will pop up a dialog to ask for the confirmation.
Figure 14 – Confirmation Dialog
After the user confirms to apply the configuration, it will pop up another progress window to show the
configuration status.